Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS4605U30 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.438in. ⁓29/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
2.298in. and 2.328in. ⁓2-21/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat countersunk
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.575in. and 0.635in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.3115in. and 0.3120in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
TRI-Wing recess
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.312in. ⁓5/16"
A measurement of the longest dimension of the grip,in distinction from width.
1.865in. and 1.885in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy uns R56400
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 4928 assn std single material response or ams 4967 assn std single material response
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
TRI-Wing recess no. NAS4000-7
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
The document designator of the specification or standard which established the item of supply.
80205-NAS4605 professional/industrial association standard
Answers.
Unjf
Titanium alloy uns r56400
24
1.865 inches minimum and 1.885 inches maximum
Flat countersunk
0.438 inches
Right-hand
3a
Schedule B number: 8109900000
Zirconium and articles thereof nesoi
FSC 5305 ⁓ Screws
NSN 5305-01-256-5797 SCREW,CLOSE TOLERANCE
unjf thread series 24 thread quantity per inch 1.865" grip length flat countersunk head style 0.438" thread length right-hand 3a thread class
- NIIN
- 012565797
- NIIN Date
- 06/06/87
- Schedule B
- 8109900000
- Name Code
- 29294
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Availability for NAS4605U30 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
NAS4605U30 / Screw,close toleranceWhat is the formal definition of this item?
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.
