Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.378in. and 0.428in. ⁓7/16"
3.450in. and 3.480in. ⁓3-31/64"
flat countersunk
0.464in. and 0.507in.
0.2485in. and 0.2495in.
offset cruciform (torque set)
0.250in. ⁓1/4"
3.052in. and 3.072in.
28
160000 pounds per square inch
36.0 rockwell c and 40.0 rockwell c
99.0 degrees and 101.0 degrees
32.0 microinches grip
32.0 microinches threads
steel comp E4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4340
cadmium and chromate
QQ-P-416, ty 2 cl 2 fed spec single treatment response
unjf
80205-NAS1580 professional/industrial association standard
Unjf
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4340
28
3.052 inches minimum and 3.072 inches maximum
Flat countersunk
0.378 inches minimum and 0.428 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unjf thread series cadmium surface treated 28 thread quantity per inch 3.052" grip length flat countersunk head style 0.378" thread length right-hand 3a thread class
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.