Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.363in. ⁓3/8"
0.660in. and 0.690in. ⁓45/64"
pan no. 2
0.360in. and 0.374in.
0.115in. and 0.125in. ⁓1/8"
patch threads or pellet threads or strip threads
0.1885in. and 0.1895in.
TORQUE-Set ribbed
0.190in. (UTS #10)
0.302in. and 0.322in.
32
160000 pounds per square inch
36.0 rockwell c fastener and 40.0 rockwell c fastener
32.0 microinches bearing surface of HEAD32.0 microinches GRIP32.0 microinches threads
plastic polyamide locking featuresteel comp 4140 fastener or steel comp E4340 fastener or steel comp 8740 fastener
MIL-S-5626 mil spec 1st material response fastener or MIL-S-5000 mil spec 2nd material response fastener or MIL-S-6049 mil spec 3rd material response fastener
cadmium fastener and chromate fastener
QQ-P-416 ty 2 cl 2 fed spec single treatment response fastener
unjf
80205-NAS1578 professional/industrial association standard
1EA
Unjf
Plastic polyamide locking featuresteel comp 4140 fastener or steel comp e4340 fastener or steel comp 8740 fastener
32
0.302 inches minimum and 0.322 inches maximum
Pan no. 2
0.363 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unjf thread series cadmium fastener surface treated 32 thread quantity per inch 0.302" grip length pan no. 2 head style 0.363" thread length right-hand 3a thread class
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.