Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.276in. ⁓9/32"
0.636in. and 0.666in. ⁓43/64"
pan
0.289in. and 0.322in.
0.105in. and 0.115in. ⁓1/8"
0.1625in. and 0.1635in.
offset cruciform (torque set)
0.164in. (UTS #8)
0.375in.
32
140000 pounds per square inch
248.0 brinell standard and 321.0 brinell standard
32.0 microinches bearing surface of head
32.0 microinches grip
32.0 microinches threads
iron alloy 660
ams 5732 assn std single material response
passivate
QQ-P-35 fed spec single treatment response
unjc
80205-NAS1132 professional/industrial association standard
1EA
Unjc
Iron alloy 660
32
0.375 inches
Pan
0.276 inches minimum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unjc thread series passivate surface treated 32 thread quantity per inch 0.375" grip length pan head style 0.276" thread length right-hand 3a thread class
1. | NAS1132C6 | Cage 07851 |
2. | NAS1132C6 | Cage 73197 |
3. | NAS1132C6 | Cage 80539 |
4. | NAS1132C6 | Cage 92215 |
5. | NAS1132C6 | Cage 50568 |
6. | NAS1132C6 | Cage 53606 |
7. | NAS1132C6 | Cage 56878 |
8. | NAS1132C6 | Cage 58998 |
9. | NAS1132C6 | Cage 80205 |
10. | NAS1132C6 | Cage 04348 |
11. | NAS1132C6 | Cage 97928 |
12. | NAS1132C6 | Cage 30902 |
13. | NAS11832C6 | Cage 08938 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.