Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.251in. and 0.301in. ⁓5/16"
6.636in. and 6.666in. ⁓6-43/64"
pan
0.256in. and 0.270in.
0.087in. and 0.097in. ⁓7/64"
0.1365in. and 0.1375in.
offset cruciform (torque set)
0.138in. (UTS #6)
6.365in. and 6.385in.
32
160000 pounds per square inch
32.0 microinches bearing surface of head
32.0 microinches grip
32.0 microinches threads
navy special project
iron alloy 660
ams 5737 assn std single material response
cadmium and chromate
QQ-P-416, ty 2, cl 2 fed spec all treatment responses
unjc
80205-NAS1131 professional/industrial association standard
1EA
Unjc
Iron alloy 660
32
6.365 inches minimum and 6.385 inches maximum
Pan
0.251 inches minimum and 0.301 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unjc thread series cadmium surface treated navy special project 32 thread quantity per inch 6.365" grip length pan head style 0.251" thread length right-hand 3a thread class
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.