NAS1122-4H

NAS11224H Close Tolerance Screw

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS1122-4H specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.251in. and 0.301in. ⁓5/16"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.511in. and 0.541in. ⁓35/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat chamfer

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.265in. and 0.270in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.088in. and 0.102in. ⁓7/64"

Grip Diameter
The length of a straight line which passes through the center of the grip,and terminates at the circumference.

0.1625in. and 0.1635in.

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

offset cruciform (torque set)

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.164in. (UTS #8)

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.240in. and 0.260in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

36.0 rockwell c and 40.0 rockwell c

Surface Finish
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.

32.0 microinches bearing surface of head

Surface Finish
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.

32.0 microinches grip

Surface Finish
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.

32.0 microinches threads

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4140 or steel comp E4340 or steel comp 6150 or steel comp 8735 or steel comp 8740

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5626 mil spec 1st material response or MIL-S-5000 mil spec 2nd material response or MIL-S-8503 mil spec 3rd material response or MIL-S-6098 mil spec 4th material response or MIL-S-6049 mil spec 5th material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium and chromate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416 ty 2 cl 3 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjc

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

80205-NAS1122 professional/industrial association standard

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjc

What material is the close tolerance screw made of ?

Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740

What is the thread quantity per inch?

32

What is the grip length?

0.240 inches minimum and 0.260 inches maximum

What is the head style?

Flat chamfer

What is the thread length?

0.251 inches minimum and 0.301 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for NAS1122-4H?

5305-00-815-0692

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of NAS1122-4H?

FSC 5305 ⁓ Screws

NSN 5305-00-815-0692 SCREW,CLOSE TOLERANCE

unjc thread series cadmium surface treated 32 thread quantity per inch 0.240" grip length flat chamfer head style 0.251" thread length right-hand 3a thread class

NIIN
008150692
NIIN Date
01/01/62
Schedule B
7318152000 
Name Code
29294
FIIG
A003B0
Item Weight
0.100lbs
Item Dimensions
--
QUP
Historical Price
$6.03 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. NA51122-4H Cage 17446

Major End Users Countries and entities

  • - Department of The Navy 
  • - Department of The Air Force 
  • - U.s. Coast Guard 
  • - Poland 
  • - Spain 
  • - Singapore 
  • - Republic of Korea 
  • - Greece 

Availability for NAS1122-4H A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

NAS1122-4H / Screw,close toleranceWhat is the formal definition of this item?

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.