Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.276in. ⁓9/32"
0.949in. and 0.979in. ⁓63/64"
flat fillister
0.221in. and 0.226in.
0.074in. and 0.086in. ⁓3/32"
0.1365in. and 0.1375in.
offset cruciform (torque set)
0.1380in. (UTS #6)
0.678in. and 0.698in.
32
32.0 microinches bearing surface of head
32.0 microinches threads
screw, MACHINE-Flat fillister head, close tol., short thread, offset cruciform
other surfaces are 125 microinches
steel comp 4140 or steel comp 4340 or steel comp 8740
MIL-S-5626 mil spec 1st material response or MIL-S-5000 mil spec 2nd material response or MIL-S-6049 mil spec 3rd material response
cadmium
QQ-P-416, type ii, class 2 fed spec single treatment response
unjc
80205-NAS1121 thru 1128 professional/industrial association standard
1EA
Unjc
Steel comp 4140 or steel comp 4340 or steel comp 8740
32
0.678 inches minimum and 0.698 inches maximum
Flat fillister
0.276 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unjc thread series cadmium surface treated other surfaces are 125 microinches screw, machine-flat fillister head, close tol., short thread, offset cruciform 32 thread quantity per inch 0.678" grip length flat fillister head style 0.276" thread length right-hand 3a thread class
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.