Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NA0035-040006 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
7.0 mm and 8.0 mm
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
13.2 mm and 13.8 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
pan no. 2
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
7.7 mm and 8.0 mm
A measurement from the bottom to the top of the head,in distinction from depth.
2.2 mm and 2.4 mm
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
3.965 mm and 3.990 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
offset cruciform (torque set)
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
4.0 mm
A measurement of the longest dimension of the grip,in distinction from width.
5.8 mm and 6.2 mm
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
36.0 rockwell c and 40.0 rockwell c
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
0.7
A numeric-alpha designator indicating established pitch and crest diameter tolerance positions and grades of an external thread.
4H6H
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
0.8 micrometers threads
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
0.8 micrometers bearing surface of head
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
0.8 micrometers grip
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E4340 or steel comp 8740
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5000 mil spec 1st material response or MIL-S-6049 mil spec 2nd material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium and chromate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 TY2 CL2 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
mj
The document designator of the specification or standard which established the item of supply.
80205-NA0035 professional/industrial association standard
Answers.
Mj
Steel comp e4340 or steel comp 8740
5.8 millimeters minimum and 6.2 millimeters maximum
Pan no. 2
7.0 millimeters minimum and 8.0 millimeters maximum
Right-hand
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-520-3818 SCREW,CLOSE TOLERANCE
mj thread series cadmium surface treated 5.8mm grip length pan no. 2 head style 7.0mm thread length right-hand
- NIIN
- 015203818
- NIIN Date
- 05/10/04
- Schedule B
- 7318152000
- Name Code
- 29294
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Germany
Availability for NA0035-040006 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
NA0035-040006 / Screw,close toleranceWhat is the formal definition of this item?
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.
