Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.251in. and 0.301in. ⁓5/16"
0.511in. and 0.541in. ⁓35/64"
pan
0.256in. and 0.270in.
0.087in. and 0.097in. ⁓7/64"
patch threads or pellet threads or strip threads
0.1370in. and 0.1375in.
HIGH-Torque
0.138in. (UTS #6)
0.240in. and 0.260in.
32
160000 pounds per square inch
navy special project
plastic locking feature
ams 5732 assn std single material response fastener
passivate fastener
QQ-P-35 fed spec single treatment response fastener
unjc
1EA
Unjc
Plastic locking feature
32
0.240 inches minimum and 0.260 inches maximum
Pan
0.251 inches minimum and 0.301 inches maximum
Right-hand
3a
FSC 5305 ⁓ Screws
unjc thread series passivate fastener surface treated navy special project 32 thread quantity per inch 0.240" grip length pan head style 0.251" thread length right-hand 3a thread class
1. | LS15234C06-4L | Cage 98897 |
2. | LS15234C06-4L | Cage 56878 |
3. | LS15234C06-4L | Cage 73197 |
4. | LS15234C06-4L | Cage 92215 |
5. | LS15234C06-4L | Cage L4528 |
6. | LS15234C06-4L | Cage 0PTK6 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.