Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.276in. ⁓9/32"
0.449in. and 0.479in. ⁓31/64"
pan
0.242in. and 0.270in.
0.087in. and 0.097in. ⁓7/64"
0.1365in. and 0.1375in.
offset cruciform (torque set)
0.138in. (UTS #6)
0.187in.
32
160000 pounds per square inch
36.0 rockwell c and 40.0 rockwell c
32.0 microinches bearing surface of head
32.0 microinches grip
32.0 microinches threads
steel comp 4140 or steel comp E4340 or steel comp 6150 or steel comp 8735 or steel comp 8740
MIL-S-5626 mil spec 1st material response or MIL-S-5000 mil spec 2nd material response or MIL-S-8503 mil spec 3rd material response or MIL-S-6098 mil spec 4th material response or MIL-S-6049 mil spec 5th material response
cadmium
QQ-P-416, ty 2, cl 3 fed spec single treatment response
unjc
80205-NAS1131 professional/industrial association standard
On 10/02/1985 under contract DLA50086P0050MODF0001 for qty 9,400
1EA
Unjc
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740
32
0.187 inches
Pan
0.276 inches minimum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unjc thread series cadmium surface treated 32 thread quantity per inch 0.187" grip length pan head style 0.276" thread length right-hand 3a thread class
1. | NAS1131-3 | Cage 17446 |
2. | NAS1131-3 | Cage 80205 |
3. | NAS1131-3 | Cage 07851 |
4. | NAS1131-3 | Cage 73197 |
5. | NAS1131-3 | Cage 80539 |
6. | NAS1131-3 | Cage 92215 |
7. | NAS1131-3 | Cage 50568 |
8. | NAS1131-3 | Cage 53606 |
9. | NAS1131-3 | Cage 56878 |
10. | NAS1131-3 | Cage 58998 |
11. | NAS1131-3 | Cage 04348 |
12. | NAS1131-3 | Cage 97928 |
13. | NAS1131-3 | Cage 30902 |
14. | NAS1131-3 | Cage 08938 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.