Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.914in. ⁓59/64"
3.211in. and 3.241in. ⁓3-1/4"
spline drive shear head
0.390in. and 0.410in. ⁓27/64"
0.7480in. and 0.7490in.
0.141in. first hole and 0.146in. first hole
1.096in.
w/o internal drive
0.750in. ⁓3/4"
2.297in. and 2.327in.
16
125000 pounds per square inch
3.072in. first hole and 3.113in. first hole
32.0 microinches
nickel alloy 718
ams 5662 fed spec single material response
cadmium
QQ-P-416, tyii, CL2 fed spec single treatment response
unjf
1EA
Unjf
Nickel alloy 718
16
2.297 inches minimum and 2.327 inches maximum
Spline drive shear head
0.914 inches
Right-hand
3a
Schedule B number: 7508900000
nmfc 096640
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5305 ⁓ Screws
unjf thread series cadmium surface treated 16 thread quantity per inch 2.297" grip length spline drive shear head head style 0.914" thread length right-hand 3a thread class
1. | PBF1420-12D37P | Cage 27624 |
2. | AIC1653-12D37P | Cage 06725 |
3. | 03A098-12D37P | Cage 06710 |
4. | VCJ0001-12D37P | Cage 06710 |
5. | 03A098-12D37P | Cage 06725 |
6. | 03A098-12D37P | Cage 17446 |
7. | 03A098-12D37P | Cage 1W025 |
8. | 03A098-12D37P | Cage 27624 |
9. | SII1188-12D37P | Cage 57928 |
10. | 03A098-12D37P | Cage 57928 |
11. | MB209-12D37 | Cage 73197 |
12. | 03A098-12D37P | Cage 73197 |
13. | 03A098-12D37P | Cage 80539 |
14. | VS3319-12D37P | Cage 92215 |
15. | 03A098-12D37P | Cage L4528 |
16. | MB209-12D37 | Cage L4528 |
17. | 123709-12D37P | Cage 80539 |
18. | 03A098-12D37P | Cage 9N513 |
19. | VS3319-12D37P | Cage 9N513 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.