Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.356in. and 0.392in. ⁓13/32"
1.497in. and 1.517in. ⁓1-17/32"
flat countersunk
0.328in. and 0.385in.
detent ball threads
0.1889in. and 0.1894in.
0.070in. first hole and 0.080in. first hole
offset cruciform (torque set)
0.190in. (UTS #10)
1.125in. and 1.141in.
32
63000 pounds per square inch
43.0 rockwell c and 47.0 rockwell c
99.0 degrees and 101.0 degrees
1.408in. first hole and 1.428in. first hole
32.0 microinches grip
32.0 microinches threads
internal drive ribbed
steel comp XM-13
AMS5629 assn std single material response
passivate
QQ-P-35 fed spec single treatment response
unjf
1EA
Unjf
Steel comp xm-13
32
1.125 inches minimum and 1.141 inches maximum
Flat countersunk
0.356 inches minimum and 0.392 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unjf thread series passivate surface treated internal drive ribbed 32 thread quantity per inch 1.125" grip length flat countersunk head style 0.356" thread length right-hand 3a thread class
1. | GB510CG3-18 | Cage 26512 |
2. | GB510CG3-18 | Cage 06950 |
3. | GB510CG3-18 | Cage 27624 |
4. | GB510CG3-18 | Cage 73197 |
5. | GB510CG3-18 | Cage 80539 |
6. | GB510CG3-18 | Cage L4528 |
7. | GB510CG3-18 | Cage 58845 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.