Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 3MA583-3 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.356in. ⁓23/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.594in. ⁓19/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat countersunk
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.376in. and 0.381in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.1885in. and 0.1895in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
HIGH-Torque
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.190in. (UTS #10)
A measurement of the longest dimension of the grip,in distinction from width.
0.178in. and 0.198in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
160000 pounds per square inch
The included angle of the countersink.
100.0 degrees
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches top of head
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches bearing surface of head
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches grip
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches threads
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
primer bearing surface of head
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
mcdonnell douglas corp, ps 13421 mfr ref single treatment response bearing surface of head
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 2, class 2 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
Unf
Steel comp 4130
32
0.178 inches minimum and 0.198 inches maximum
Flat countersunk
0.356 inches
Right-hand
3a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-00-080-9231 SCREW,CLOSE TOLERANCE
unf thread series primer bearing surface of head surface treated 32 thread quantity per inch 0.178" grip length flat countersunk head style 0.356" thread length right-hand 3a thread class
- NIIN
- 000809231
- NIIN Date
- 12/15/67
- Schedule B
- 7318152000
- Name Code
- 29294
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3MFRA583-3 | Cage 76301 |
| 2. | 3MFRA583-3T | Cage 76301 |
Major End Users Countries and entities
- - Germany
Availability for 3MA583-3 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
3MA583-3 / Screw,close toleranceWhat is the formal definition of this item?
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.
