Serving our customers with quality and safety first.
3a
0.500in. ⁓1/2"
1.350in. and 1.650in. ⁓1-21/32"
fillister countersunk
0.564in.
0.081in. ⁓3/32"
0.3740in. and 0.3745in.
recessed type i
f/a 18e/f
0.375in. ⁓3/8"
1.000in.
24
99.0 degrees and 101.0 degrees
screw, MACHINE-100 degrees c'sunk, HI-Torque, reduced head, special thread length, cres (125 ksi fsu)
steel corrosion resisting
passivate
AMS-QQ-P-35 assn std single treatment response
unjf
1EA
Unjf
Steel corrosion resisting
24
1.000 inches
Fillister countersunk
0.500 inches
3a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
Used on f/a 18e/f. unjf thread series passivate surface treated screw, machine-100 degrees c'sunk, hi-torque, reduced head, special thread length, cres (125 ksi fsu) 24 thread quantity per inch 1.000" grip length fillister countersunk head style 0.500" thread length 3a thread class
1. | HT4041-6-16-8 | Cage 06950 |
2. | HT4041-6-16-8 | Cage 17446 |
3. | HT4041-6-16-8 | Cage 58998 |
4. | HT4041-6-16-8 | Cage 56878 |
5. | HT4041-6-16-8 | Cage 60516 |
6. | HT4041-616-8 | Cage 73197 |
7. | HT4041-6-16-8 | Cage K5673 |
8. | HT4041-616-8 | Cage L4528 |
9. | HT4041-6-16-8 | Cage 0PTK6 |
10. | 11873-6-16-8 | Cage 59563 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.