Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.41in. and 0.44in. ⁓29/64"
1.285in. and 1.315in. ⁓1-21/64"
flat countersunk undercut
0.3859in. and 0.3948in.
0.358in. and 0.365in.
0.057in. ⁓1/16"
0.1100in. and 0.1120in.
0.2646in. and 0.2651in.
torx
f/A-18 e/f
0.250in. ⁓1/4"
0.865in. and 0.885in.
cetyl alcohol lubricant
28
99.00 degrees and 101.0 degrees
bolt, 100deg reduced head, gear drive recess, inconel 718 (125ksi shear) , 0.0156 inch oversize
passivate plus cetyl alcohol per MIL-L-87132, type 1, grade b.see tech data for all info about finish and any other additional details
nickel alloy
AMS5662 national std/spec single material response
passivate
MIL-L-87132 mil spec single treatment response
unjf
Unjf
Nickel alloy
28
0.865 inches minimum and 0.885 inches maximum
Flat countersunk undercut
0.41 inches minimum and 0.44 inches maximum
Right-hand
3a
Schedule B number: 7508900000
nmfc 096640
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5305 ⁓ Screws
Used on f/a-18 e/f. unjf thread series passivate surface treated passivate plus cetyl alcohol per mil-l-87132, type 1, grade b.see tech data for all info about finish bolt, 100deg reduced head, gear drive recess, inconel 718 (125ksi shear) , 0.0156 inch oversize 28 thread quantity per inch 0.865" grip length flat countersunk undercut head style 0.41" thread length right-hand 3a thread class
1. | TX1027E4D14XA | Cage 06725 |
2. | TX1027E4D14XA | Cage 06950 |
3. | TX1027E4D14XA | Cage 27624 |
4. | TX1027E4D14XA | Cage 56878 |
5. | TX1027E4D14XA | Cage 80539 |
6. | TX1027E4D14XA | Cage 73197 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.