3M1170C6-10A

3M1170C610A Close Tolerance Screw

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 3M1170C6-10A specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.578in. ⁓37/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.188in. and 1.218in. ⁓1-7/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat countersunk

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.524in. and 0.531in.

Spline Minor Diameter
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.

0.1570in. and 0.1600in.

Spline Major Diameter
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.

0.2195in. and 0.2225in.

Grip Diameter
The length of a straight line which passes through the center of the grip,and terminates at the circumference.

0.3735in. and 0.3745in.

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

torx

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

F18 e/f

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.375in. ⁓3/8"

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.615in. and 0.635in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

24

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

agav

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

bolt, 100 degree reduced head, gear drive RECESS-PH13-8Mo (125 ksi shear) , inconel 718 (125 ksi shear) , 6AL-4V titanium (95 ksi shear)

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

nickel alloy 718

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5662 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf

What material is the close tolerance screw made of ?

Nickel alloy 718

What is the thread quantity per inch?

24

What is the grip length?

0.615 inches minimum and 0.635 inches maximum

What is the head style?

Flat countersunk

What is the thread length?

0.578 inches

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for 3M1170C6-10A?

5305-01-513-1154

How is this classified for shipping?

Schedule B number: 7508900000
nmfc 096640
Other articles of nickel (excluding cloth, grill & netting of nickel wire)

What's the federal classification of 3M1170C6-10A?

FSC 5305 ⁓ Screws

NSN 5305-01-513-1154 SCREW,CLOSE TOLERANCE

Used on f18 e/f. unjf thread series passivate surface treated bolt, 100 degree reduced head, gear drive recess-PH13-8mo (125 ksi shear) , inconel 718 (125 ksi shear) , 6al-4v titanium (95 ksi shear) 24 thread quantity per inch 0.615" grip length flat countersunk head style 0.578" thread length right-hand 3a thread class

NIIN
015131154
NIIN Date
09/18/03
Schedule B
7508900000 
Name Code
29294
FIIG
A003B0
Item Weight
0.000lbs
Item Dimensions
--
QUP
Historical Price
$115.00 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. TX1027C6-10A Cage 06725
2. TX1027C6-10A Cage 06970
3. TX1027C6-10A Cage 27624
4. TX1027C6-10A Cage 80539
5. TX1027C6-10A Cage 56878
6. TX1027C6-10A Cage 73197
7. TX1027C6-10A Cage C4293
8. 3M1170D6-10A Cage 76301
9. TX1027D6-10A Cage 06725
10. TX1027D6-10A Cage 06950
11. HP1170D6-10 Cage 0ZC92
12. TX1027D6-10A Cage 27624
13. TX1027D6-10A Cage 56878
14. TX1027D6-10A Cage 73197
15. TX1027D6-10A Cage 80539
16. 11825D6-10A Cage 59563
17. TX1027D6-10A Cage 0PTK6
18. 11825C6-10A Cage 59563
19. TX1027C6-10A Cage L4528
20. TX1027C6-10A Cage 0PTK6
21. 3M1170D6-10A Cage 06710
22. 3M1170D6-10A Cage 0K6Z0
23. 3M1170D6-10A Cage 0ZC92
24. TX1027D6-10A Cage 17446
25. GS1014C6-10A Cage 1EM77
26. GS1014D6-10A Cage 1EM77
27. 3M1170D6-10A Cage 58998
28. 11845D6-10A Cage 59563
29. 11845C6-10A Cage 59563
30. TX1027D6-10A Cage 92215
31. TX1027C6-10A Cage 17446
32. 3M1170D6-10A Cage 1VSL7
33. WC1170C6-10A Cage 60516
34. WC1170D6-10A Cage 60516
35. TX1027C6-10A Cage 92215
36. TX1027D6-10A Cage C4293

Major End Users Countries and entities

  • - Department of The Navy 

Availability for 3M1170C6-10A A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
70.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
096640 SCREWS, IRON OR STEEL 
UFC (universal freight code)
50600 

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

3M1170C6-10A / Screw,close toleranceWhat is the formal definition of this item?

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.