Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.293in. and 0.328in. ⁓21/64"
1.418in. and 1.438in. ⁓1-29/64"
flat countersunk
0.449in. and 0.502in.
detent ball grip
0.2487in. and 0.2492in.
0.076in. first hole and 0.086in. first hole
offset cruciform (torque set)
0.250in. ⁓1/4"
1.110in. and 1.125in.
28
40.0 rockwell c and 45.0 rockwell c
100.0 degrees
1.323in. first hole and 1.343in. first hole
32.0 microinches grip
retaining element in threads
steel comp 8740 or steel comp E4340 or steel comp 4340
cadmium threads and chromate threads
cadmium head and chromate head
QQ-P-416, TY2 CL3 fed spec single treatment response threads
QQ-P-416, TY2 CL3 fed spec single treatment response head
unjf
1EA
Unjf
Steel comp 8740 or steel comp e4340 or steel comp 4340
28
1.110 inches minimum and 1.125 inches maximum
Flat countersunk
0.293 inches minimum and 0.328 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unjf thread series cadmium head surface treated retaining element in threads 28 thread quantity per inch 1.110" grip length flat countersunk head style 0.293" thread length right-hand 3a thread class
1. | CA4750-04-16 | Cage 29372 |
2. | AS-111-04-16 | Cage 84256 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.