Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 2010100-16 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.450in. ⁓29/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.745in. ⁓3/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.450in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.095in. ⁓7/64"
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.231in.
A measurement of the longest dimension of the point,in distinction from width.
0.080in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
flat
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type ii
A measurement of the longest dimension of the grip,in distinction from width.
0.210in.
118.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
has metric threads
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
Answers.
1EA
Steel
0.210 inches
Flush
0.450 inches
Right-hand
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-390-1273 SCREW,CLOSE TOLERANCE
cadmium surface treated has metric threads 0.210" grip length flush head style 0.450" thread length right-hand
- NIIN
- 013901273
- NIIN Date
- 05/12/94
- Schedule B
- 7318152000
- Name Code
- 29294
- FIIG
- A003B0
- QUP
- 1
- Historical Price
- $3.88 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - U.s. Coast Guard
Availability for 2010100-16 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
2010100-16 / Screw,close toleranceWhat is the formal definition of this item?
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.
