Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 123256-5R2512 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.228in. and 0.378in. ⁓25/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.228in. and 1.248in. ⁓1-1/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat countersunk
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.577in. and 0.635in.
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.
detent ball grip
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.3108in. and 0.317in.
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.
0.076in. first hole and 0.086in. first hole
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
offset cruciform (torque set)
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.312in. ⁓5/16"
A measurement of the longest dimension of the grip,in distinction from width.
0.750in. and 0.766in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
36.0 rockwell c and 41.0 rockwell c
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The distance from the shank hole centerline to the largest bearing surface of the head.
1.123in. first hole and 1.138in. first hole
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches bearing surface of head
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches grip
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches threads
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
internal drive ribbed
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630 locking feature or steel comp 631 locking feature or steel comp 440c locking feature
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E4340 fastener or steel comp 4140 fastener or steel comp 8740 fastener or steel comp 4130 fastener or steel comp 6150 fastener
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5643 assn std 1st material response locking feature or AMS5644 assn std 2nd material response locking feature or QQ-S-763 fed spec 3rd material response locking feature
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium fastener and chromate fastener
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate locking feature
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response locking feature
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 TY2 CL2 fed spec single treatment response fastener
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
1EA
Unjf
Steel comp e4340 fastener or steel comp 4140 fastener or steel comp 8740 fastener or steel comp 4130 fastener or steel comp 6150 fastener
Steel comp 630 locking feature or steel comp 631 locking feature or steel comp 440c locking feature
24
0.750 inches minimum and 0.766 inches maximum
Flat countersunk
0.228 inches minimum and 0.378 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-265-8955 SCREW,CLOSE TOLERANCE
unjf thread series passivate locking feature surface treated internal drive ribbed 24 thread quantity per inch 0.750" grip length flat countersunk head style 0.228" thread length right-hand 3a thread class
- NIIN
- 012658955
- NIIN Date
- 10/19/87
- Schedule B
- 7318152000
- Name Code
- 29294
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $277.63 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | AS303-25-12 | Cage 84256 |
| 2. | LE111-0044-2512 | Cage 43999 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for 123256-5R2512 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
123256-5R2512 / Screw,close toleranceWhat is the formal definition of this item?
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.
