Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 120-225C08-09 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.399in. ⁓13/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.681in. ⁓11/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
round extended washer
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.312in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.087in. ⁓3/32"
0.375in.
0.025in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.163in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cruciform ribbed
The national stock number or the identification information of the end equipment for which the item is a part.
support of PRE-Provisioning items for which navicp phil acts as poe (E-Nsn isil)
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.164in. (UTS #8)
A measurement of the longest dimension of the grip,in distinction from width.
0.156in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
1425 pounds per square inch
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
agav
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
screw, washer head, close tolerance, long thread, 95 ksi fsu
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5731 assn std 1st material response or AMS5732 assn std 2nd material response or AMS5737 fed spec 3rd material response or AMS5853 assn std 4th material response
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 2, CLASS2 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjc
Answers.
1EA
Unjc
Iron alloy 660
32
0.156 inches
Round extended washer
0.399 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-524-1536 SCREW,CLOSE TOLERANCE
Used on support of pre-provisioning items for which navicp phil acts as poe (e-nsn isil). unjc thread series screw, washer head, close tolerance, long thread, 95 ksi fsu 32 thread quantity per inch 0.156" grip length round extended washer head style 0.399" thread length right-hand 3a thread class
- NIIN
- 015241536
- NIIN Date
- 09/23/04
- Schedule B
- 7318152000
- Name Code
- 29294
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- 1
- Historical Price
- $69.10 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Navy
Availability for 120-225C08-09 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
120-225C08-09 / Screw,close toleranceWhat is the formal definition of this item?
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.
