Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.437in. ⁓7/16"
0.531in. ⁓17/32"
round extended washer
0.312in.
0.082in. and 0.092in. ⁓3/32"
0.375in.
0.023in. and 0.028in.
0.312in.
0.163in.
flat
cross recess type ii
0.164in. (UTS #8)
0.531in.
32
1425 pounds per square inch
screw, washer head, close tolerance, long thresd, 95 ksi
steel corrosion resisting
A286 per the chemistry of ams 5731, ams 5732, ams 5732, ams 5737, or ams 5853 assn std single material response
passivate
QQ-P-35 fed std single treatment response
unjc
1EA
Unjc
Steel corrosion resisting
32
0.531 inches
Round extended washer
0.437 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unjc thread series passivate surface treated screw, washer head, close tolerance, long thresd, 95 ksi 32 thread quantity per inch 0.531" grip length round extended washer head style 0.437" thread length right-hand 3a thread class
1. | 120-225C08R08P | Cage 06725 |
2. | 120-225C08R08P | Cage 27624 |
3. | 120-225C08R08P | Cage 56878 |
4. | 120-225C08R08P | Cage 62206 |
5. | 120-225C08R08P | Cage 62384 |
6. | 120-225C08R08P | Cage 97499 |
7. | 120-225C08R08P | Cage 0K6Z0 |
8. | 120-225C08R08P | Cage 0ZC92 |
9. | 120-225C08R08P | Cage 1EM77 |
10. | 120-225C08R08P | Cage 1ER65 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.