03A519-4-11C

03A519411C Close Tolerance Screw

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 03A519-4-11C specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.425in. ⁓7/16"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.998in. and 1.128in. ⁓1-9/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat countersunk

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.449in. and 0.507in.

Spline Major Diameter
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.

0.173in. and 0.183in.

Grip Diameter
The length of a straight line which passes through the center of the grip,and terminates at the circumference.

0.2490in. and 0.2495in.

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

torx

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

adv tech bmbr

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.250in. ⁓1/4"

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.562in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

28

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

plastic cap permanently affixed to head

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

plastic top of head

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

titanium alloy uns R56400 fastener

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

09A196-2, CAGE1W025 mfr ref single material response top of head

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS4928 assn std single material response fastener or AMS4967 assn std single material response fastener

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What class is the thread series?

Unjf

What material is the close tolerance screw made of ?

Titanium alloy uns r56400 fastener

What material is the close tolerance screw made of ?

Plastic top of head

What is the thread quantity per inch?

28

What is the grip length?

0.562 inches

What is the head style?

Flat countersunk

What is the thread length?

0.425 inches

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for 03A519-4-11C?

5305-01-491-4243

How is this classified for shipping?

Schedule B number: 8109900000
Zirconium and articles thereof nesoi

What's the federal classification of 03A519-4-11C?

FSC 5305 ⁓ Screws

NSN 5305-01-491-4243 SCREW,CLOSE TOLERANCE

Used on adv tech bmbr. unjf thread series plastic cap permanently affixed to head 28 thread quantity per inch 0.562" grip length flat countersunk head style 0.425" thread length right-hand 3a thread class

NIIN
014914243
NIIN Date
10/22/01
Schedule B
8109900000 
Name Code
29294
FIIG
A003B0
Item Weight
0.000lbs
Item Dimensions
--
QUP
 
Historical Price
$61.35 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. CB9350-4-11C Cage 66530

Major End Users Countries and entities

  • - Department of The Air Force 

Availability for 03A519-4-11C A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

03A519-4-11C / Screw,close toleranceWhat is the formal definition of this item?

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.