Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 02329-5 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.332in. ⁓11/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
2.415in. and 2.435in. ⁓2-7/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
crowned hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.157in. and 0.172in. ⁓11/64"
0.492in. and 0.502in.
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.
detent ball grip
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.3112in. and 0.3117in.
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.
0.076in. first hole and 0.086in. first hole
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
slot
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.312in. ⁓5/16"
A measurement of the longest dimension of the grip,in distinction from width.
1.937in. and 1.953in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
62500 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
50.0 rockwell c locking feature and 62.0 rockwell c locking feature
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
feat
The distance from the shank hole centerline to the largest bearing surface of the head.
2.302in. first hole and 2.322in. first hole
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches bearing surface of head
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches grip
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
safety critical item. apply one coat of MIL-P-23377, ty 1, cl 1 or 3 and two top coats of MIL-C-46168, color code 33538 per FED-STD-595 to top of head
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 403 locking feature or steel comp 405 locking feature or steel comp 410 locking feature or steel comp 414 locking feature or steel comp 416 locking feature or steel comp 416se locking feature or steel comp 420 locking feature or steel comp 430 locking feature or steel comp 430f locking feature or steel comp 430fse locking feature or steel comp 431 locking feature or steel comp 440a locking feature or steel comp 440b locking feature or steel comp 440c locking feature or steel comp 440f locking feature or steel comp 440fse locking feature or steel comp 446 locking feature
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp XM-13 fastener
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 631 spring or steel comp 302 spring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5629 assn std single material response fastener
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5673 assn std 1st material response spring or QQ-W-423 fed spec 2nd material response spring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec all material responses locking feature
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Steel comp 631 spring or steel comp 302 spring
Steel comp xm-13 fastener
Steel comp 403 locking feature or steel comp 405 locking feature or steel comp 410 locking feature or steel comp 414 locking feature or steel comp 416 locking feature or steel comp 416se locking feature or steel comp 420 locking feature or steel comp 430 locking feature or steel comp 430f locking feature or steel comp 430fse locking feature or steel comp 431 locking feature or steel comp 440a locking feature or steel comp 440b locking feature or steel comp 440c locking feature or steel comp 440f locking feature or steel comp 440fse locking feature or steel comp 446 locking feature
24
1.937 inches minimum and 1.953 inches maximum
Crowned hexagon
0.332 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-383-0505 SCREW,CLOSE TOLERANCE
unjf thread series passivate surface treated safety critical item. apply one coat of mil-p-23377, ty 1, cl 1 or 3 24 thread quantity per inch 1.937" grip length crowned hexagon head style 0.332" thread length right-hand 3a thread class
- NIIN
- 013830505
- NIIN Date
- 11/17/93
- Schedule B
- 7318152000
- Name Code
- 29294
- FIIG
- A003B0
- QUP
- Historical Price
- $38.33 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Navy
Availability for 02329-5 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
02329-5 / Screw,close toleranceWhat is the formal definition of this item?
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.
