Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. WC331K5-3 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.280in. ⁓9/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.4575in. and 0.4775in. ⁓31/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
countersunk cylindrical convex
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.1625in. and 0.1635in.
0.2532in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
w/o internal drive
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.1640in. (UTS #8)
A measurement of the longest dimension of the grip,in distinction from width.
0.1875in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The included angle of the countersink.
100.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
item has a hex hole in the threaded end that is 0.0791 - 0.0806in. across the flats and 0.080in. deep.
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 4928 assn std single material response or ams 4967 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
aluminum
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
BMS10-85, type 1, class a mfr ref single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjc
Answers.
Unjc
Titanium
32
0.1875 inches
Countersunk cylindrical convex
0.280 inches
Right-hand
3a
Schedule B number: 8108908000
Other wrought titanium
FSC 5306 ⁓ Bolts
NSN 5306-01-622-6169 BOLT,CLOSE TOLERANCE
unjc thread series aluminum surface treated item has a hex hole in the threaded end that is 0.0791 - 0.0806" across the flats 32 thread quantity per inch 0.1875" grip length countersunk cylindrical convex head style 0.280" thread length right-hand 3a thread class
- NIIN
- 016226169
- NIIN Date
- 10/16/13
- Schedule B
- 8108908000
- Name Code
- 27851
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Republic of Korea
Availability for WC331K5-3 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
WC331K5-3 / Bolt,close toleranceWhat is the formal definition of this item?
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
