Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.371in. and 0.438in. ⁓29/64"
1.006in. and 1.053in. ⁓1-1/16"
double hexagon
0.154in. and 0.174in. ⁓3/16"
0.430in. and 0.439in.
0.2490in. and 0.2495in.
0.250in. ⁓1/4"
0.615in. and 0.635in.
28
steel corrosion resisting
unjf
Unjf
Steel corrosion resisting
28
0.615 inches minimum and 0.635 inches maximum
Double hexagon
0.371 inches minimum and 0.438 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unjf thread series 28 thread quantity per inch 0.615" grip length double hexagon head style 0.371" thread length right-hand 3a thread class
1. | VAL23029-4-10 | Cage 06710 |
2. | 109453-4-10 | Cage 56878 |
3. | MB61-4-10 | Cage 73197 |
4. | US3204-4-10 | Cage 92215 |
5. | BM17019-4-10 | Cage 17446 |
6. | MB61-4-10 | Cage L4528 |
7. | ST3M453-4-10 | Cage 76301 |
8. | SLB252-4-10 | Cage 16258 |
9. | GS1016-4-10 | Cage 1EM77 |
10. | ST3M453-4-10 | Cage 1VSL7 |
11. | HP5453-4-10 | Cage 0ZC92 |
12. | FIT7047-4-10 | Cage 58998 |
13. | 11825-4-10 | Cage 59563 |
14. | WC453-4-10 | Cage 60516 |
15. | 109453-4-10 | Cage 50392 |
16. | BM17019-4-10 | Cage 97928 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.