VCG0001-5D70

VCG00015D70 Close Tolerance Bolt

Home » Catalog » Fasteners (p. 1373) » Close Tolerance Bolts (p. 22) » Part Number VCG0001-5D70

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Serving our customers with quality and safety first.

AS9120 Certified
Audited supply chain
ITAR Registered
DDTC Registered
HAZMAT Certified
Customer service objectives
Every product 100% inspected

Datasheet. VCG0001-5D70 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.375in. ⁓3/8"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

4.740in. and 4.760in. ⁓4-49/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

spline drive shear head

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.187in. ⁓3/16"

Grip Diameter
The length of a straight line which passes through the center of the grip,and terminates at the circumference.

0.484in. and 0.511in.

Shank Unthreaded Hole Diameter
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.

0.076in. fastener and 0.081in. fastener

Head Minor Diameter

0.514in. and 0.521in.

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

F18 e/f

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.313in. ⁓21/64"

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

4.375in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

agav

Distance From Head Largest Bearing Surface To Shank Hole Center
The distance from the shank hole centerline to the largest bearing surface of the head.

4.632in. fastener and 4.770in. fastener

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

BOLT-Close tolerance, spline drive, cres (125 ksi fsu) drilled, short thread

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp XM-13

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5629 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf

What material is the close tolerance bolt made of ?

Steel comp xm-13

What is the thread quantity per inch?

What is the grip length?

4.375 inches

What is the head style?

Spline drive shear head

What is the thread length?

0.375 inches

What is the thread direction?

Right-hand

What is the thread class?

What is the NSN for VCG0001-5D70?

5306-01-513-9065

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of VCG0001-5D70?

FSC 5306 ⁓ Bolts

NSN 5306-01-513-9065 BOLT,CLOSE TOLERANCE

Used on f18 e/f. unjf thread series passivate surface treated bolt-close tolerance, spline drive, cres (125 ksi fsu) drilled, short thread 24 thread quantity per inch 4.375" grip length spline drive shear head head style 0.375" thread length right-hand 3a thread class

NIIN: 015139065
NIIN Date: 10/09/03
Schedule B: 7318152000
Name Code: 27851
FIIG: A003B0
QUP: 1
Historical Price: $255.00 EA
DEMIL / ITAR: Uncontrolled item (Code A)
Hazmat: No hazard information available from HMIRS.
MSDS: N/A
Precious Metals: No precious metals
Enviromental: N/A
Electrostatic ESD & EMI: No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1.	AIC687-5D70	Cage 06725
2.	VS3174-5D70	Cage 06950
3.	ST3M744-5D70	Cage 0ZC92
4.	PBF1265-5D70	Cage 27624
5.	ST3M744-5D70	Cage 58998
6.	122895-5D70	Cage 80539
7.	ST3M744-5D70	Cage 76301
8.	122895-5D70	Cage 0PTK6
9.	AIC687-5D70	Cage 06725
10.	VS3174-5D70	Cage 06950
11.	ST3M744-5D70	Cage 0ZC92
12.	PBF1265-5D70	Cage 27624
13.	ST3M744-5D70	Cage 58998
14.	122895-5D70	Cage 80539
15.	VS3174-5D70	Cage 17446
16.	SLB748-5D70	Cage 16258
17.	GS1015-5D70	Cage 1EM77
18.	122895-5D70	Cage 56878
19.	11823-5D70	Cage 59563
20.	ST3M744-5D70	Cage 76301
21.	VS3174-5D70	Cage 92215
22.	NAS655V70D	Cage 80205
23.	ST3M744-5D70	Cage 1VSL7
24.	WC744-5D70	Cage 60516
25.	122895-5D70	Cage 0PTK6
26.	AIC687-5D70	Cage 06725
27.	VS3174-5D70	Cage 06950
28.	ST3M744-5D70	Cage 0ZC92
29.	PBF1265-5D70	Cage 27624
30.	ST3M744-5D70	Cage 58998
31.	122895-5D70	Cage 80539
32.	VS3174-5D70	Cage 17446
33.	SLB748-5D70	Cage 16258
34.	GS1015-5D70	Cage 1EM77
35.	122895-5D70	Cage 56878
36.	11823-5D70	Cage 59563
37.	ST3M744-5D70	Cage 76301
38.	VS3174-5D70	Cage 92215
39.	NAS655V70D	Cage 80205
40.	ST3M744-5D70	Cage 1VSL7
41.	WC744-5D70	Cage 60516
42.	122895-5D70	Cage 0PTK6

Major End Users Countries and entities

- Department of The Navy
- Australia

Availability for VCG0001-5D70 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling: Other or no special handling required (sh)
LTL (less than a truck load rating): Rating variable
LCL (less than a car load rating): Unknown
Special Cargo: No special type of cargo code applicable
Air Freight (Minimum cargo door size required): Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Customs Requirement Classification: Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
Commodity (for shipments via water): Bolts or nuts (iron or steel),(less than 35 feet)
NMFC (national motor freight code): 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
UFC (universal freight code): 48950

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

VCG0001-5D70 / Bolt,close toleranceWhat is the formal definition of this item?

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.