NAS6704-39

NAS670439 Close Tolerance Bolt

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS6704-39 specification

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.425in. ⁓7/16"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

2.863in. ⁓2-7/8"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

dished hexagon

Grip Diameter
The length of a straight line which passes through the center of the grip,and terminates at the circumference.

0.241in. and 0.244in.

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

PRE-Provisioning support

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

2.428in. and 2.448in.

Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

agav

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-C-320 fed spec 1st material response fastener

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-F-416 fed spec 1st material response threads

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-P-416 fed spec 1st material response sides of head

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-P-416 fed spec 2nd material response bearing surface of head

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium threads

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium top of head

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

chromium fastener

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium bearing surface of head

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf

What material is the close tolerance bolt made of ?

Iron alloy 660

What is the grip length?

2.428 inches minimum and 2.448 inches maximum

What is the head style?

Dished hexagon

What is the thread length?

0.425 inches

What is the thread direction?

Right-hand

What is the NSN for NAS6704-39?

5306-01-523-8322

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of NAS6704-39?

FSC 5306 ⁓ Bolts

NSN 5306-01-523-8322 BOLT,CLOSE TOLERANCE

Used on pre-provisioning support. unjf thread series cadmium bearing surface of head surface treated 2.428" grip length dished hexagon head style 0.425" thread length right-hand

NIIN
015238322
NIIN Date
09/16/04
Schedule B
7318152000 
Name Code
27851
FIIG
A003B0
Item Weight
0.000lbs
Item Dimensions
QUP
Historical Price
$302.50 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Navy 

Availability for NAS6704-39 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Bolts or nuts (iron or steel),(less than 35 feet) 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

NAS6704-39 / Bolt,close toleranceWhat is the formal definition of this item?

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.