Serving our customers with quality and safety first.
RIGHT-Hand
14.00 mm and 15.00 mm
40.020 mm and 40.80 mm
undercut hexagon
4.7 mm and 5.0 mm
16.73 mm and 17.00 mm
9.9620 mm and 9.9870 mm
10.0 mm
25.80 mm and 26.20 mm
1100 megapascals
36.0 rockwell c and 40.0 rockwell c
1.25
0.8 micrometers bearing surface of head
0.8 micrometers grip
0.8 micrometers threads
steel comp E4340 or steel comp 8740
MIL-S-5000 mil spec 1st material response or MIL-S-6049 mil spec 2nd material response
cadmium and chromate
QQ-P-416 ty 2 cl 2 fed spec single treatment response
mj
80205-NA0036 professional/industrial association standard
Mj
Steel comp e4340 or steel comp 8740
25.80 millimeters minimum and 26.20 millimeters maximum
Undercut hexagon
14.00 millimeters minimum and 15.00 millimeters maximum
Right-hand
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
mj thread series cadmium surface treated 25.80mm grip length undercut hexagon head style 14.00mm thread length right-hand
1. | 10087919 | Cage A486G |
Nothing similar to this part number was found in our inventory
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.