Serving our customers with quality and safety first.
3a
RIGHT-Hand
1.000in. ⁓1/64"
2.312in. ⁓2-5/16"
double hexagon
0.378in. and 0.398in. ⁓13/32"
0.430in. and 0.439in.
0.343in. and 0.353in.
0.375in. ⁓3/8"
1.313in.
24
280000 pounds per square inch
bolt, double hexagon, tension, 280, 000 psi tenstile strength, 450 degress f
vacuum cadmium plated; heat treat 280, 000 psi ultimate tenstile strength, RC52 for maraging, RC53 for aermet; magnetic particle inspect 100 percent per astm e 1444; undrilled head; head of bolt to be forged; thread shall be rolled after heat treatment; fatigue, TENSION-Tension fatigue loads, high loads equals 11, 800 lbs, low load equals 1, 180 lbs; high fatigue strength based on 48percent of min. tenstile strength and 10 percent of high tenstile strength
steel comp 305
AMS5514 assn std single material response or AMS6532 assn std single material response
cadmium
MIL-C-6887, TY2, CL2 mil spec single treatment response
unf
Unf
Steel comp 305
24
1.313 inches
Double hexagon
1.000 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unf thread series cadmium surface treated vacuum cadmium plated; heat treat 280, 000 psi ultimate tenstile strength, RC52 for maraging, RC53 for aermet; magnetic particle inspect 100 percent per astm e 1444; undrilled head; head of bolt to be forged; thread shall be rolled after heat treatment; fatigue, tension-tension fatigue loads, high loads equals 11, 800 lbs, low load equals 1, 180 lbs; high fatigue strength based on 48percent of min. tenstile strength bolt, double hexagon, tension, 280, 000 psi tenstile strength, 450 degress f 24 thread quantity per inch 1.313" grip length double hexagon head style 1.000" thread length right-hand 3a thread class
1. | SLB361-6-21 | Cage 16258 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.