Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HP5453-3-18 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.305in. and 0.372in. ⁓3/8"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.440in. and 1.487in. ⁓1-1/2"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
double hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.130in. and 0.150in. ⁓5/32"
0.367in. and 0.376in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.1890in. and 0.1895in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.190in. (UTS #10)
A measurement of the longest dimension of the grip,in distinction from width.
1.115in. and 1.135in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
23-112 ty b fscm 76301 mfr ref single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Steel corrosion resisting
32
1.115 inches minimum and 1.135 inches maximum
Double hexagon
0.305 inches minimum and 0.372 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-067-3397 BOLT,CLOSE TOLERANCE
unjf thread series 32 thread quantity per inch 1.115" grip length double hexagon head style 0.305" thread length right-hand 3a thread class
- NIIN
- 010673397
- NIIN Date
- 10/28/78
- Schedule B
- 7318152000
- Name Code
- 27851
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $59.45 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | BM17019-3-18 | Cage 17446 |
| 2. | VAL23029-3-18 | Cage 06710 |
| 3. | AIC753-3-18 | Cage 06725 |
| 4. | 109453-3-18 | Cage 80539 |
| 5. | MB61-3-18 | Cage 73197 |
| 6. | US3204-3-18 | Cage 92215 |
| 7. | BM17019-3-18 | Cage 97928 |
| 8. | ST3M453-3-18 | Cage 06725 |
| 9. | ST3M453-3-18 | Cage 06710 |
| 10. | ST3M453-3-18 | Cage 06950 |
| 11. | ST3M453-3-18 | Cage 0UCY9 |
| 12. | ST3M453-3-18 | Cage 0ZC92 |
| 13. | S353-3-18 | Cage 17446 |
| 14. | ST3M453-3-18 | Cage 17446 |
| 15. | ST3M453-3-18 | Cage 27624 |
| 16. | ST3M453-3-18 | Cage 57928 |
| 17. | ST3M453-3-18 | Cage 58998 |
| 18. | ST3M453-3-18 | Cage 56878 |
| 19. | 11825-3-18 | Cage 59563 |
| 20. | ST3M453-3-18 | Cage 73197 |
| 21. | ST3M453-3-18 | Cage 80539 |
| 22. | MB61-3-18 | Cage L4528 |
| 23. | ST3M453-3-18 | Cage L4528 |
| 24. | ST3M453-3-18 | Cage 76301 |
| 25. | ST3M453-3-18 | Cage 0PTK6 |
| 26. | ST3M453-3-18 | Cage 59764 |
| 27. | S353-3-18 | Cage 97928 |
| 28. | 109453-3-18 | Cage 56878 |
Major End Users Countries and entities
- - Department of The Air Force
- - Republic of Korea
Availability for HP5453-3-18 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
HP5453-3-18 / Bolt,close toleranceWhat is the formal definition of this item?
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
