Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. BACB30NF8D19 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.541in. ⁓35/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.713in. and 1.743in. ⁓1-3/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon extended washer
A measurement from the bottom to the top of the head,in distinction from depth.
0.250in. and 0.265in. ⁓17/64"
0.746in.
0.734in. and 0.752in.
0.015in. and 0.025in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.4985in. and 0.4995in.
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.
0.106in. first hole and 0.116in. first hole
The national stock number or the identification information of the end equipment for which the item is a part.
rod assy, part no. 90-2247-3003 for main gear door instl on E-3A acft
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.5000in. ⁓1/2"
A measurement of the longest dimension of the grip,in distinction from width.
1.178in. and 1.198in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
The distance from the shank hole centerline to the largest bearing surface of the head.
1.542in. first hole
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
top of head is dished, 0.49/0.51 in. dia
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4340 or steel comp 8740
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5000 mil spec single material response or MIL-S-6049 mil spec single material response or ams 6322 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 2, class 2 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Steel comp 4340 or steel comp 8740
20
1.178 inches minimum and 1.198 inches maximum
Hexagon extended washer
0.541 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-321-1704 BOLT,CLOSE TOLERANCE
Used on rod assy,part no. 90-2247-3003 for main gear door instl on e-3a acft. unjf thread series cadmium surface treated top of head is dished, 0.49/0.51 in. dia 20 thread quantity per inch 1.178" grip length hexagon extended washer head style 0.541" thread length right-hand 3a thread class
- NIIN
- 013211704
- NIIN Date
- 06/12/90
- Schedule B
- 7318152000
- Name Code
- 27851
- FIIG
- A003B0
- QUP
- Historical Price
- $55.43 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
Availability for BACB30NF8D19 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
BACB30NF8D19 / Bolt,close toleranceWhat is the formal definition of this item?
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
