AN176H13

AN176H13 Close Tolerance Bolt

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. AN176H13 specification

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.641in. ⁓41/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.437in. and 1.484in. ⁓1-31/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

hexagon

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.203in. and 0.235in. ⁓1/4"

Width Between Flats

0.553in. and 0.565in.

Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.

0.070in. and 0.080in. ⁓3/32"

Grip Diameter
The length of a straight line which passes through the center of the grip,and terminates at the circumference.

0.3737in. and 0.3742in.

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.375in. ⁓3/8"

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.796in. and 0.828in.

Hole Quantity
The number of holes provided.

1

Hole Type
Indicates the type of hole(s) provided in the item.

drilled

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

24

Hole Configuration Style
The style designation that most nearly corresponds to the appearance of the hole configuration.

hexagon flats

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 8740 or steel comp 8630 or steel comp 4140 or steel comp 4130 or steel comp 4037

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium and chromate

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unf

What material is the close tolerance bolt made of ?

Steel comp 8740 or steel comp 8630 or steel comp 4140 or steel comp 4130 or steel comp 4037

What is the thread quantity per inch?

24

What is the grip length?

0.796 inches minimum and 0.828 inches maximum

What is the inside hole diameter?

0.070 inches minimum and 0.080 inches maximum

What is the head style?

Hexagon

What is the thread length?

0.641 inches minimum

What is the thread direction?

Right-hand

What is the NSN for AN176H13?

5306-01-450-1979

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of AN176H13?

FSC 5306 ⁓ Bolts

NSN 5306-01-450-1979 BOLT,CLOSE TOLERANCE

unf thread series cadmium surface treated 24 thread quantity per inch 0.796" grip length 0.070" hole diameter hexagon head style 0.641" thread length right-hand

NIIN
014501979
NIIN Date
10/30/97
Schedule B
7318152000 
Name Code
27851
FIIG
A003B0
Item Weight
0.100lbs
Item Dimensions
--
QUP
Historical Price
$116.30 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Navy 
  • - Department of The Air Force 
  • - Poland 

Availability for AN176H13 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
50.0
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing 
Commodity (for shipments via water)
Bolts or nuts (iron or steel),(less than 35 feet) 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

AN176H13 / Bolt,close toleranceWhat is the formal definition of this item?

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.