Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 9512M23P01 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.825in. ⁓53/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.112in. and 1.132in. ⁓1-9/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
double hexagon extended washer
A measurement from the bottom to the top of the head,in distinction from depth.
0.410in. ⁓27/64"
0.438in.
0.590in. and 0.610in.
0.090in. and 0.100in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.374in.
The national stock number or the identification information of the end equipment for which the item is a part.
F110-GE-129 basic engine
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.375in. ⁓3/8"
A measurement of the longest dimension of the grip,in distinction from width.
0.292in. and 0.302in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
250.0 microinches point
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches grip
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
thread modified major dia 0.3678/0.3730; min energy absorption 240 ft/lb; min test velocity 16.5 ft/sec
The chemical compound or mechanical mixture properties of which the item is fabricated.
cobalt comp MP-35-N
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Cobalt comp mp-35-n
24
0.292 inches minimum and 0.302 inches maximum
Double hexagon extended washer
0.825 inches
Right-hand
3a
Schedule B number: 8105900000
nmfc 096630
Cobalt, wrought, and articles thereof
FSC 5306 ⁓ Bolts
NSN 5306-01-173-5034 BOLT,CLOSE TOLERANCE
Used on f110-ge-129 basic engine. unjf thread series thread modified major dia 0.3678/0.3730; min energy absorption 240 ft/lb; min test velocity 16.5 ft/sec 24 thread quantity per inch 0.292" grip length double hexagon extended washer head style 0.825" thread length right-hand 3a thread class
- NIIN
- 011735034
- NIIN Date
- 03/07/84
- Schedule B
- 8105900000
- Name Code
- 27851
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $59.25 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
- - Poland
- - Singapore
- - Republic of Korea
- - Greece
Availability for 9512M23P01 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- 70.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 096630 SCREWS NOI BRASS/BRONZE/COPPER
- UFC (universal freight code)
- 50590
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
9512M23P01 / Bolt,close toleranceWhat is the formal definition of this item?
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
