Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.380in. and 0.390in. ⁓25/64"
1.220in. ⁓1-15/64"
dee chamfer
0.625in.
0.187in. ⁓3/16"
0.250in.
0.3740in. and 0.3750in.
0.375in. ⁓3/8"
0.755in. and 0.765in.
24
280000 pounds per square inch
aaur
steel
MIL-S-8844, cl 3, cond E2 mil spec single material response
unjf
On 07/10/2015 under contract SPE5E415M2278 for qty 1
1EA
Unjf
Steel
24
0.755 inches minimum and 0.765 inches maximum
Dee chamfer
0.380 inches minimum and 0.390 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unjf thread series 24 thread quantity per inch 0.755" grip length dee chamfer head style 0.380" thread length right-hand 3a thread class
1. | 74A410773-2001 | Cage 13002 |
2. | 74A410773-2001 | Cage 76301 |
3. | 74A410773-2001 | Cage 6Z056 |
4. | 10115766 | Cage A486G |
5. | 74A410773-2001 | Cage 2M490 |
6. | 74A410773-2001 | Cage 35962 |
7. | 74A410773-2001 | Cage 59563 |
8. | 74A410773-2001 | Cage 85941 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.