106467-8-22

106467822 Close Tolerance Bolt

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 106467-8-22 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.646in. and 0.650in. ⁓21/32"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

2.021in. and 2.041in. ⁓2-3/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

dished hexagon

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.251in. and 0.266in. ⁓17/64"

Width Between Flats

0.840in.

Grip Diameter
The length of a straight line which passes through the center of the grip,and terminates at the circumference.

0.4982in. and 0.4991in.

Shank Unthreaded Hole Diameter
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.

0.106in. and 0.116in. first hole

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.500in. ⁓1/2"

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

1.375in. and 1.391in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

20

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

95000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

36.0 rockwell c and 41.0 rockwell c

Distance From Head Largest Bearing Surface To Shank Hole Center
The distance from the shank hole centerline to the largest bearing surface of the head.

1.911in. and 1.921in. first hole

Surface Finish
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.

63.0 microinches bearing surface of head

Surface Finish
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.

63.0 microinches grip

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

retaining element in shank

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E4340 or steel comp 4140 or steel comp 8740 or steel comp 4130

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5000 mil spec single material response or MIL-S-5626 mil spec single material response or MIL-S-6049 mil spec single material response or MIL-S-6758 mil spec single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 mil spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

96906-MS27576-8-22 government standard

Answers.

What class is the thread series?

Unjf

What material is the close tolerance bolt made of ?

Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130

What is the thread quantity per inch?

20

What is the grip length?

1.375 inches minimum and 1.391 inches maximum

What is the head style?

Dished hexagon

What is the thread length?

0.646 inches minimum and 0.650 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for 106467-8-22?

5306-01-226-3176

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of 106467-8-22?

FSC 5306 ⁓ Bolts

NSN 5306-01-226-3176 BOLT,CLOSE TOLERANCE

unjf thread series passivate surface treated retaining element in shank 20 thread quantity per inch 1.375" grip length dished hexagon head style 0.646" thread length right-hand 3a thread class

NIIN
012263176
NIIN Date
02/15/86
Schedule B
7318152000 
Name Code
27851
FIIG
A003B0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. MS27576-22 Cage 80205
2. MS27576-22 Cage 96906

Major End Users Countries and entities

  • - Denmark 

Availability for 106467-8-22 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

106467-8-22 / Bolt,close toleranceWhat is the formal definition of this item?

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.