Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. SS426-4491157-PIECE 26 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.054in. and 1.296in. ⁓1-19/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.560in. and 1.620in. ⁓1-5/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat countersunk
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
1.112in. and 1.188in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
hexagon
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.625in. ⁓5/8"
The shortest straight line between flats,perpendicular to the height.
0.375in. ⁓3/8"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
11
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
80000 pounds per square inch
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
40000 pounds per square inch
The included angle of the countersink.
80.0 degrees and 84.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
material is NICKEL-Copper alluminum; offset yield strength is 90, 000 pounds per square inch; FF-S-86 uses the 0.2% offset yield
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy K-500
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-N-286, cl a fed spec single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.
4 type
Answers.
1EA
Unc
Nickel alloy k-500
11
Flat countersunk
1.054 inches minimum and 1.296 inches maximum
Right-hand
2a
Schedule B number: 7508900000
nmfc 139820
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5305 ⁓ Screws
NSN 5305-01-117-1453 SCREW,CAP,SOCKET HEAD
unc thread series material is nickel-copper alluminum; offset yield strength is 90, 000 pounds per square inch; ff-s-86 uses the 0.2% offset yield 11 thread quantity per inch flat countersunk head style 1.054" thread length right-hand 2a thread class
- NIIN
- 011171453
- NIIN Date
- 08/09/81
- Schedule B
- 7508900000
- Name Code
- 16282
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $149.48 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | FF-S-86 | Cage 81348 |
Major End Users Countries and entities
- - Department of The Navy
- - Brazil
Availability for SS426-4491157-PIECE 26 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 85.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 139820 NICKEL BOLTS/NAILS/NUTS/RIVETS ETC
- UFC (universal freight code)
- 70220
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
SS426-4491157-PIECE 26 / Screw,cap,socket headWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.
