Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. SNT5017106A6 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.345in. and 0.405in. ⁓13/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.345in. and 0.405in. ⁓13/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
pan no. 2
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.282in. and 0.294in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.092in. and 0.097in. ⁓7/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type iii
The national stock number or the identification information of the end equipment for which the item is a part.
improved target acquisition system (itas)
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.138in. (UTS #6)
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
A numeric-alpha designator indicating established pitch and crest diameter tolerance positions and grades of an external thread.
21
The included angle of the chamfer(s).
45.0 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
screw, machine, pan head, SELF-Sealing
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
O-Ring material buna n and are located on the underneath side of the head
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.
black
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 302 or steel comp 304 or steel comp 305 or nickel alloy
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5735 assn std single material response or astm A266 assn std single material response or QQ-S-763, stainless steel steel 302, 304, 305 or 16-13 CHROME-Nickel fed spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
oxide
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-13924, class ii, black oxide, mil spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
1EA
Unc
Steel comp 302 or steel comp 304 or steel comp 305 or nickel alloy
32
Pan no. 2
0.345 inches minimum and 0.405 inches maximum
Right-hand
2a
FSC 5305 ⁓ Screws
NSN 5305-01-613-2740 SCREW,CAP,SOCKET HEAD
Used on improved target acquisition system (itas). unc thread series oxide surface treated o-ring material buna n screw, machine, pan head, self-sealing 32 thread quantity per inch pan no. 2 head style 0.345" thread length right-hand 2a thread class
- NIIN
- 016132740
- NIIN Date
- 11/05/12
- Schedule B
- Name Code
- 16282
- FIIG
- A003B0
- Item Weight
- 0.200lbs
- Item Dimensions
- 40 X 40 X 10
- QUP
- 1
- Historical Price
- $0.95 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 535459-71 | Cage 96214 |
| 2. | 535459 | Cage 96214 |
Major End Users Countries and entities
- - U.s. Marine Corps
- - Department of The Army
Availability for SNT5017106A6 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
SNT5017106A6 / Screw,cap,socket headWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.
