NAS608-3-12P

NAS608312P Cap Socket Head Screw
Home » Catalog » Fasteners (p. 4899) » Cap Socket Head Screws (p. 1) » Part Number NAS608-3-12P

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS608-3-12P specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.709in. and 0.739in. ⁓3/4"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.740in. and 0.770in. ⁓25/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat chamfer

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.306in. and 0.311in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.172in. and 0.176in. ⁓3/16"

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

hexagon

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.190in. (UTS #10)

Width Across Flats
The shortest straight line between flats,perpendicular to the height.

0.156in. and 0.158in. ⁓11/64"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

180000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

36.0 rockwell c and 43.0 rockwell c

Minimum Yield Strength
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.

155000 pounds per square inch

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6758 mil spec 1st material response or MIL-S-6050 mil spec 2nd material response or MIL-S-6098 mil spec 3rd material response or MIL-S-6049 mil spec 4th material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type 2, class 3 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

80205-NAS608 professional/industrial association standard

Answers.

What class is the thread series?

Unf

What material is the cap socket head screw made of ?

Steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740

What is the thread quantity per inch?

32

What is the head style?

Flat chamfer

What is the thread length?

0.709 inches minimum and 0.739 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for NAS608-3-12P?

5305-01-023-8827

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of NAS608-3-12P?

FSC 5305 ⁓ Screws

NSN 5305-01-023-8827 SCREW,CAP,SOCKET HEAD

unf thread series cadmium surface treated 32 thread quantity per inch flat chamfer head style 0.709" thread length right-hand 3a thread class

NIIN
010238827
NIIN Date
06/28/76
Schedule B
7318152000 
Name Code
16282
FIIG
A003B0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - France 

Availability for NAS608-3-12P A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

NAS608-3-12P / Screw,cap,socket headWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.