Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1351N3-16S specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.875in. ⁓7/8"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.950in. and 1.000in. ⁓1/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat chamfer
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.154in. and 0.161in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.095in. and 0.099in. ⁓7/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
hexagon
The national stock number or the identification information of the end equipment for which the item is a part.
seasprite helicopter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.099in. (UTS #3)
The shortest straight line between flats,perpendicular to the height.
0.078in. ⁓5/64"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
56
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
180000 pounds per square inch
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
32000 pounds per square inch
The included angle of the chamfer(s).
30.0 degrees and 45.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5731 assn std 1st material response or ams 5737 assn std 2nd material response and FF-S-86 assn std 3rd material response
Identification of the precious material contained in the item.
silver
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
silver
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
ams 2411 assn std single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unrf
The document designator of the specification or standard which established the item of supply.
80205-NAS1351 professional/industrial association standard
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.
nha engine instl, lh and rh, K870301-009 and K870301-101
Answers.
Unrf
Steel
56
Flat chamfer
0.875 inches minimum
Right-hand
3a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-518-7068 SCREW,CAP,SOCKET HEAD
Used on seasprite helicopter. unrf thread series silver surface treated 56 thread quantity per inch flat chamfer head style 0.875" thread length right-hand 3a thread class
- NIIN
- 015187068
- NIIN Date
- 03/19/04
- Schedule B
- 7318152000
- Name Code
- 16282
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains silver
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - New Zealand
Availability for NAS1351N3-16S A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1351N3-16S / Screw,cap,socket headWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.
