Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1351-5H36P specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.125in. ⁓1-1/8"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
2.250in. ⁓2-1/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat chamfer
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.457in. and 0.469in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.306in. and 0.312in. ⁓5/16"
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.044in. and 0.050in. ⁓1/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
hexagon
The national stock number or the identification information of the end equipment for which the item is a part.
3MH60Sc airframe; guide assembly
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.313in. ⁓21/64"
The shortest straight line between flats,perpendicular to the height.
0.250in. ⁓1/4"
The number of holes provided.
6
Indicates the type of hole(s) provided in the item.
drilled
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
10400 pounds per square inch
The style designation that most nearly corresponds to the appearance of the hole configuration.
round internal hexagon
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
inavy: screw, cap, socket, he; std: screw, cap, socket head, drilled, plain, alloy steel, UNRF-3A
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.
black
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
FF-S-86 fed std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
AMS-QQ-P-416, type ii, class 2 assn std single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unrf
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.
unrf
Answers.
Unrf
Steel
24
0.044 inches minimum and 0.050 inches maximum
Flat chamfer
1.125 inches minimum
Right-hand
3a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-579-7146 SCREW,CAP,SOCKET HEAD
Used on 3mh60sc airframe; guide assembly. unrf thread series cadmium surface treated navy: screw, cap, socket, he; std: screw, cap, socket head, drilled, plain, alloy steel, unrf-3a 24 thread quantity per inch 0.044" hole diameter flat chamfer head style 1.125" thread length right-hand 3a thread class
- NIIN
- 015797146
- NIIN Date
- 11/20/09
- Schedule B
- 7318152000
- Name Code
- 16282
- FIIG
- A003B0
- QUP
- Historical Price
- $140.13 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for NAS1351-5H36P A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1351-5H36P / Screw,cap,socket headWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.
