NAS1189E08P6LH

NAS1189E08P6LH Cap Socket Head Screw
Home » Catalog » Fasteners (p. 1194) » Cap Socket Head Screws (p. 1) » Part Number NAS1189E08P6LH

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS1189E08P6LH specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.318in. ⁓21/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.375in. ⁓3/8"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat countersunk

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.267in. and 0.279in.

Locking Feature
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.

strip threads

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

cruciform ribbed

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.138in. (UTS #6)

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

SELF-Locking

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660 fastener

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

plastic polyamide locking feature

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aams 5737, A286 assn std single material response fastener

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type ii; class 2 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjc

Answers.

What class is the thread series?

Unjc

What material is the cap socket head screw made of ?

Plastic polyamide locking feature

What material is the cap socket head screw made of ?

Iron alloy 660 fastener

What is the thread quantity per inch?

32

What is the head style?

Flat countersunk

What is the thread length?

0.318 inches

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for NAS1189E08P6LH?

5305-01-532-0498

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of NAS1189E08P6LH?

FSC 5305 ⁓ Screws

NSN 5305-01-532-0498 SCREW,CAP,SOCKET HEAD

unjc thread series cadmium surface treated self-locking 32 thread quantity per inch flat countersunk head style 0.318" thread length right-hand 3a thread class

NIIN
015320498
NIIN Date
07/26/05
Schedule B
7318152000 
Name Code
16282
FIIG
A003B0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Netherlands 

Availability for NAS1189E08P6LH A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

NAS1189E08P6LH / Screw,cap,socket headWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.