MS16996-14

MS1699614 Cap Socket Head Screw

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. MS16996-14 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

1.000in. ⁓1/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.000in. ⁓1/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat chamfer

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.303in. and 0.313in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.185in. and 0.190in. ⁓13/64"

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

hexagon

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.190in. (UTS #10)

Width Across Flats
The shortest straight line between flats,perpendicular to the height.

0.156in. and 0.159in. ⁓11/64"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

80000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

80.0 rockwell b

Minimum Yield Strength
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.

30000 pounds per square inch

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 304

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-S-763 fed spec single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81348-FF-S-86 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf

Nondefinitive Spec/std Data
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.

6 type

Departure From Cited Document
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.

as modified by material

Departure From Cited Designator
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.

as modified by condition a

Answers.

What class is the thread series?

Unf

What material is the cap socket head screw made of ?

Steel comp 304

What is the thread quantity per inch?

32

What is the head style?

Flat chamfer

What is the thread length?

1.000 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for MS16996-14?

5305-00-993-3152

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of MS16996-14?

FSC 5305 ⁓ Screws

NSN 5305-00-993-3152 SCREW,CAP,SOCKET HEAD

unf thread series passivate surface treated 32 thread quantity per inch flat chamfer head style 1.000" thread length right-hand 3a thread class

NIIN
009933152
NIIN Date
03/30/67
Schedule B
7318152000 
Name Code
16282
FIIG
A003B0
QUP
 
Historical Price
$0.15 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. 77C707911P66 Cage 03538

Major End Users Countries and entities

  • - Germany 
  • - Republic of Korea 
  • - Turkey 

Availability for MS16996-14 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

MS16996-14 / Screw,cap,socket headWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.