DIN 912-M5X8

DIN912M5X8 Cap Socket Head Screw
Home » Catalog » Fasteners (p. 4183) » Cap Socket Head Screws (p. 1) » Part Number DIN 912-M5X8

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. DIN 912-M5X8 specification

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

6.4 mm and 8.0 mm

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

8.00 mm

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat chamfer

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

8.28 mm and 8.50 mm

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

4.82 mm and 5.00 mm

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

hexagon

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

5.0 mm

Width Across Flats
The shortest straight line between flats,perpendicular to the height.

4.03 mm and 4.15 mm

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

113000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

18.0 rockwell c and 31.0 rockwell c

Thread Pitch In Millimeters
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.

0.8

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

8.8 din 912 fscm 15526 mfr ref single material response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

m

Answers.

What class is the thread series?

M

What material is the cap socket head screw made of ?

Steel

What is the head style?

Flat chamfer

What is the thread length?

6.4 millimeters minimum and 8.0 millimeters maximum

What is the thread direction?

Right-hand

What is the NSN for DIN 912-M5X8?

5305-01-154-9550

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of DIN 912-M5X8?

FSC 5305 ⁓ Screws

NSN 5305-01-154-9550 SCREW,CAP,SOCKET HEAD

m thread series flat chamfer head style 6.4mm thread length right-hand

NIIN
011549550
NIIN Date
06/03/83
Schedule B
7318152000 
Name Code
16282
FIIG
A003B0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. 912-M5X8 Cage 15526

Major End Users Countries and entities

  • - National Aeronautics And Space Administration 
  • - Spain 

Availability for DIN 912-M5X8 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

DIN 912-M5X8 / Screw,cap,socket headWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.