Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 92855A722 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
22.000 mm
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
25.000 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
knurled no. 5
A measurement from the bottom to the top of the head,in distinction from depth.
5.000 mm
13.000 mm
The national stock number or the identification information of the end equipment for which the item is a part.
5411015870839
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
101000 pounds per square inch
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
1.250
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
screw, cap, socket head
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
M8; class 6g thread fit; low head; fully threaded
Answers.
Knurled no. 5
22.000 millimeters
Right-hand
FSC 5305 ⁓ Screws
NSN 5305-01-616-9649 SCREW,CAP,SOCKET HEAD
Used on 5411015870839. M8; class 6g thread fit; low head; fully threaded screw, cap, socket head knurled no. 5 head style 22.000mm thread length right-hand
- NIIN
- 016169649
- NIIN Date
- 03/05/13
- Schedule B
- Name Code
- 16282
- FIIG
- A003B0
- QUP
- Historical Price
- $17.55 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - U.s. Marine Corps
- - Department of The Navy
Availability for 92855A722 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
92855A722 / Screw,cap,socket headWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.
