Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 92805A723 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.516in. ⁓33/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.234in. ⁓15/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat countersunk
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.781in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
hexagon
The national stock number or the identification information of the end equipment for which the item is a part.
8196987 (53711) capture spine
The shortest straight line between flats,perpendicular to the height.
0.218in. ⁓7/32"
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
70000 pounds per square inch
The included angle of the countersink.
82.0 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
socket cap screw
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
capture spine. material type is stainless steel, finish is plain, class is not rated, stainless steel type is 18-8 stainless steel, inch thread size is 3/8 INCH-16, SELF-Locking method is nylon patch, temperature range is minus 65 degrees f to plus 250 degrees f, rockwell hardness is B70, thread fit is class 3a, length is 0.750 inch
Answers.
Flat countersunk
0.516 inches
Right-hand
FSC 5305 ⁓ Screws
NSN 5305-01-567-2537 SCREW,CAP,SOCKET HEAD
Used on 8196987 (53711) capture spine. capture spine. material type is stainless steel, finish is plain, class is not rated, stainless steel type is 18-8 stainless steel, inch thread size is 3/8 inch-16, self-locking method is nylon patch, temperature range is minus 65 degrees f to plus 250 degrees f, rockwell hardness is B70, thread fit is class 3a, length is 0.750 inch socket cap screw flat countersunk head style 0.516" thread length right-hand
- NIIN
- 015672537
- NIIN Date
- 09/22/08
- Schedule B
- Name Code
- 16282
- FIIG
- A003B0
- QUP
- Historical Price
- $34.10 PG
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 92805A723 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
92805A723 / Screw,cap,socket headWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.
