904E180 ITEM 10

904E180ITEM10 Cap Socket Head Screw

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 904E180 ITEM 10 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

2a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.490in. and 0.620in. ⁓5/8"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.590in. and 0.620in. ⁓5/8"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat chamfer

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.198in. and 0.205in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.121in. and 0.125in. ⁓1/8"

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

hexagon

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.250in. ⁓1/4"

Width Across Flats
The shortest straight line between flats,perpendicular to the height.

0.094in. ⁓3/32"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

20

Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

zzzy

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303 plus x or steel comp 303se or steel comp 303cu or steel comp 303ma or steel comp 303pb or steel comp 304 or steel comp 304l

Special Test Features
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.

special quality control testing

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unc

Reference Number Differentiating Characteristics
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.

as differentiated by material which must conform to ships parts control center special quality control provisions and certified free from mercury contamination

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unc

What material is the cap socket head screw made of ?

Steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303 plus x or steel comp 303se or steel comp 303cu or steel comp 303ma or steel comp 303pb or steel comp 304 or steel comp 304l

What is the thread quantity per inch?

20

What is the head style?

Flat chamfer

What is the thread length?

0.490 inches minimum and 0.620 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

2a

What is the NSN for 904E180 ITEM 10?

5305-01-155-6112

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of 904E180 ITEM 10?

FSC 5305 ⁓ Screws

NSN 5305-01-155-6112 SCREW,CAP,SOCKET HEAD

unc thread series 20 thread quantity per inch flat chamfer head style 0.490" thread length right-hand 2a thread class

NIIN
011556112
NIIN Date
06/13/83
Schedule B
7318152000 
Name Code
16282
FIIG
A003B0
Item Weight
0.100lbs
Item Dimensions
--
QUP
Historical Price
$30.00 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Navy 

Availability for 904E180 ITEM 10 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

904E180 ITEM 10 / Screw,cap,socket headWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.