Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 2643799 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.990in. and 1.190in. ⁓1-13/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
3.370in. and 3.390in. ⁓3-25/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat chamfer
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
hexagon
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.250in. ⁓1/4"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
1EA
Unjf
Steel corrosion resisting
28
Flat chamfer
0.990 inches minimum and 1.190 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 096630
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-00-121-3470 SCREW,CAP,SOCKET HEAD
unjf thread series 28 thread quantity per inch flat chamfer head style 0.990" thread length right-hand 3a thread class
- NIIN
- 001213470
- NIIN Date
- 11/01/68
- Schedule B
- 7318152000
- Name Code
- 16282
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $112.63 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Navy
Availability for 2643799 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096630 SCREWS NOI BRASS/BRONZE/COPPER
- UFC (universal freight code)
- 50590
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
2643799 / Screw,cap,socket headWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.
