Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 20098-98C-3 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.110in. and 0.204in. ⁓7/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.172in. and 0.204in. ⁓7/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat chamfer
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.262in. and 0.270in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.159in. and 0.164in. ⁓11/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
hexagon
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.164in. (UTS #8)
The shortest straight line between flats,perpendicular to the height.
0.140in. and 0.142in. ⁓5/32"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
80000 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
80.0 rockwell c
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
30000 pounds per square inch
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
navy special project
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
knurled head optional
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 assn std all material responses
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
Unc
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316
32
Flat chamfer
0.110 inches minimum and 0.204 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-274-0909 SCREW,CAP,SOCKET HEAD
unc thread series passivate surface treated knurled head optional navy special project 32 thread quantity per inch flat chamfer head style 0.110" thread length right-hand 3a thread class
- NIIN
- 012740909
- NIIN Date
- 03/04/88
- Schedule B
- 7318152000
- Name Code
- 16282
- FIIG
- A003B0
- QUP
- Historical Price
- $13.18 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 416863-803 | Cage 96214 |
| 2. | 416863-803 | Cage 70276 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 20098-98C-3 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
20098-98C-3 / Screw,cap,socket headWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.
