Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS51095-419 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.250in. ⁓1-1/4"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
2.656in. and 2.750in. ⁓2-3/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.302in. and 0.323in. ⁓21/64"
0.736in. and 0.750in.
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.094in. ⁓3/32"
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.500in. ⁓1/2"
The number of holes provided.
1
Indicates the type of hole(s) provided in the item.
drilled
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
13
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
120000 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
25.0 rockwell c and 34.0 rockwell c
The style designation that most nearly corresponds to the appearance of the hole configuration.
hexagon flats
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
63.0 microinches threads
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
sae gr 5 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium and chromate
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
special quality control testing
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, ty 2, cl 3 fed spec all treatment responses
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.
2 type and 10p style and 5 grade
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.
as modified by material which must conform to ships parts control center special quality control provisions
Answers.
1EA
Unc
Steel
13
0.094 inches
Hexagon
1.250 inches minimum
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-00-202-0322 SCREW,CAP,HEXAGON HEAD
unc thread series cadmium surface treated 13 thread quantity per inch 0.094" hole diameter hexagon head style 1.250" thread length right-hand 2a thread class
- NIIN
- 002020322
- NIIN Date
- 04/04/73
- Schedule B
- 7318152000
- Name Code
- 18257
- FIIG
- A003B0
- Item Weight
- 0.300lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $265.78 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | F-F-S-85 | Cage 81348 |
Major End Users Countries and entities
- - Department of The Navy
Availability for MS51095-419 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
MS51095-419 / Screw,cap,hexagon headWhat is the formal definition of this item?
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
