Serving our customers with quality and safety first.
2a
RIGHT-Hand
0.813in. and 0.875in. ⁓7/8"
0.813in. and 0.875in. ⁓7/8"
hexagon
0.226in. and 0.243in. ⁓1/4"
0.5510in. and 0.5625in.
mrap RG-33
0.375in. ⁓3/8"
16
11600 pounds per square inch
33.0 rockwell c and 39.0 rockwell c
120000 pounds per square inch
steel
SAEJ429 grade 8 assn std single material response or astm A354 grade bd assn std single material response
zinc and chromate
astm B633 ty 2 sc 3 assn std single treatment response
unc
1HD
Unc
Steel
16
Hexagon
0.813 inches minimum and 0.875 inches maximum
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
Used on mrap rg-33. unc thread series zinc surface treated 16 thread quantity per inch hexagon head style 0.813" thread length right-hand 2a thread class
1. | S-109 | Cage D9182 |
2. | 920316 | Cage 07524 |
3. | E3373 PIECE 5 | Cage 07524 |
4. | 9419883 | Cage 24617 |
5. | 34235CA ITEM 36 | Cage 96046 |
6. | 34189SA PIECE 32 | Cage 96046 |
7. | 179838 | Cage D9182 |
8. | 9442119 | Cage 94226 |
9. | B1821BH038C088N | Cage 80204 |
10. | 88-22193 | Cage 30554 |
11. | 454905 | Cage 11862 |
12. | 61527 | Cage 11862 |
13. | 9418821 | Cage 11862 |
14. | 9418821 | Cage 17769 |
15. | 3975443 | Cage 11862 |
16. | MS90728-59 | Cage 96906 |
17. | 5305PL0778828 | Cage 9009H |
18. | 5305011409118 | Cage SCY13 |
19. | B1821BH038C088N | Cage A9271 |
20. | 10382770 | Cage A486G |
Nothing similar to this part number was found in our inventory
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.